| Image Device |
1/4-type EXview HAD CCD
|
| Signal System |
NTSC
|
| Effective Pixels |
Approximately 380,000 pixels
|
| Lens |
10x Zoom f=4.2mm (wide) to 42 mm (tele) (F1.8 to F2.9)
|
| Angle of view (H) |
46° (wide end) to 5.0° (tele end)
|
| Digital zoom |
12x (120x with optical zoom)
|
| Minimum working distance |
200mm (wide end) to 1000 mm (tele end)
|
| Zoom movement speed |
Optical WIDE to Optical TELE 1.7 sec
|
| Focus movement speed |
Far to Near 0.5 sec
|
| Sync system |
Internal / External (V-lock)
|
| Horizontal Resolution |
ON/OFF (On: 530 TV Lines)
|
| Minimum illumination |
1.0 lx (typical) (F1.8, 50 IRE)
|
| Minimum illumination ICR-ON |
N/A
|
| Auto ICR Mode |
N/A
|
| S/N ratio |
More than 50 dB
|
| Electronic shutter |
1/1 to 1/10,000 s, 22 steps
|
| White balance |
Auto, ATW, Indoor, Outdoor, One-push, Manual
|
| Gain |
Auto / Manual (-3 to 28 dB, 2dB 16steps)
|
| AE control |
Auto, Manual, Priority mode, Bright, EV compensation,Back-light compensation Slow AE
|
| Extend Dynamic Range (Wide-D) |
N/A
|
| Day/Night |
Auto / Manual
|
| EV compensation |
-10.5 to 10.5 dB (1.5 dB steps)
|
| Back-light compensation |
On / Off
|
| Privacy zone masking |
On / Off (24position, 8 position per screen, 14 colors & mosaic)
|
| Character Generator |
Mode display On/Off (White Balance, Gain, etc.) Title display Max 11 lines (20 characters/ lines)
|
| Flicker cancel |
N/A
|
| Focusing system |
Auto (Sensitivity, normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom trigger AF
|
| Picture effects |
E-Flip, Nega Art, Black & White, Mirror Image
|
| Camera Operation Switch |
N/A
|
| Video output Analog |
VBS: 1.0 Vp-p (sync negative), Y/C
|
| Camera control interface |
VISCA (TTL Signal level), baud rate: 9.6 Kb/s, 19.2 Kb/s, 1 or 2 stop bit selectable
|
| Power Requirements |
6 to 12 V DC
|
| Power Consumption |
1.9W (motors inactive), 2.8W (motors active)
|
| Operating Temperature |
0º C to 50ºC
|
| Storage Temperature |
-20º C to 60ºC
|
| Mass |
Approximately 95g
|
| Dimensions |
35.9 x 40.8 x 59.2 mm
|
+49-(0)3641 2253-0
info@jencam.de