JenCam Nr. |
20028011
|
Image Sensor |
1/3-type CMOS
|
Image Sensor Typ |
IMX010AQZ-13
|
Effective Pixels |
Approximately 2,000,000 pixels
|
Signal System HD |
1080/59.94i,1080/50i,720/59.94p,720/50p
|
Lens |
10x optical zoom, F1.8 to F2.1 - f = 5.1mm to 51.0mm
|
Angle of view (H) |
50° (wide end) to 5.4° (tele end)
|
Digital zoom |
12x (120x with optical zoom)
|
Minimum working distance |
10mm (wide), 800mm (tele)
|
Focusing system |
Full Auto (Normal AF/Interval AF/Zoom Trigger AF),One-push Trigger,Manual,Infinity,Near Limit Setting
|
Zoom movement speed |
Optical WIDE to Optical TELE 1.0 sec
|
Focus movement speed |
Far to Near 1.0 sec
|
Sync system |
Internal
|
Horizontal Resolution |
High Definitionn (720p or 1080i)
|
Minimum illumination |
12.0 lx (typical) (F1.8, 50 IRE)
|
Minimum illumination ICR-ON |
N/A
|
Auto ICR Mode |
N/A
|
S/N ratio |
More than 50 dB
|
Shutter Speed |
1/2 to 1/10000 s, 21 steps
|
White Balance |
Auto, Indoor, Outdoor, One-push, Manual
|
Auto Exposure |
Auto,Manual,Shutter Priority,Iris Priority,Bright,Spot AE
|
Gain |
Auto / Manual (-3 to 18 dB, 3dB 8 steps)
|
Day/Night |
N/A
|
Back-light compensation |
On/Off
|
Aspect Ratio |
HD: 16:9, SD: 4:3 / 16:9
|
EV compensation |
-10.5 to 10.5 dB (15 steps, 1.5 dB increments)
|
Picture effects |
Nega Art, Black & White, Picture Fressze
|
Video output HD |
DVI
|
Camera Operation Switch |
Zoom Tele, Zoom Wide, Reset
|
Camera control interface |
VISCA™ RS-232C (8-pin mini DIN) control (VISCA)
|
Preset Positions |
6 positions
|
Storage Temperature |
-20 to 60 °C
|
Betriebstemperatur |
0 °C to 45 °C
|
Power Requirements |
12 V DC
|
Power Consumption |
6,5 W
|
Mass |
Approximately 400 g
|
Dimensions (W x H x D) |
54 x 54 x 118mm
|