| JenCam No. |
10027019
|
| Image Device |
1/4 type Super EXview HAD CCD
|
| Signal System |
NTSC
|
| Effective Pixels |
380.000 pixels
|
| Lens |
10x Zoom f=4.2mm (wide) to 42 mm (tele) (F1.8 to F2.9)
|
| Angle of view (H) |
46° (Wide end) / 5.0° (Tele end)
|
| Digital zoom |
4x (40x with optical zoom)
|
| Minimum working distance |
10 mm (Wide end), 1000 mm (Tele end)
|
| Zoom movement speed |
Optical WIDE to Optical TELE 1.8 sec
|
| Focus movement speed |
Far to Near 0.5 sec
|
| Sync system |
Internal
|
| Horizontal Resolution |
470TV Line
|
| Minimum illumination |
1.5 lux (50 IRE)
|
| S/N ratio |
More than 50 dB
|
| Electronic shutter |
1/1 sec. to 1/10,000 sec. 16 steps
|
| White balance |
Auto, ATW, Indoor, Outdoor, One Push WB, Manual WB
|
| Gain |
Auto/Manual (-3 to 28 dB, 2 dB steps)
|
| AE control |
Auto, Manual, Priority mode, Bright, EV compensation, Back-light compensation
|
| EV compensation |
-10.5 to +10.5 dB (1.5 dB steps)
|
| Back-light compensation |
ON/OFF
|
| Character Generator |
Mode: ON/OFF
|
| Focusing system |
Auto (Sensitivity: Normal, Low), One-Push AF, Manual, Infinity Interval AF, Zoom Trigger AF
|
| Picture effects |
Neg. Art, Black & White, Mirror Image, Picture freeze
|
| Camera Operation Switch |
Zoom tele, Zoom wide
|
| Video output Analog |
VBS: 1.0 Vp-p (sync negative), Y/C Output
|
| Camera control interface |
VISCA (TTL/RS232C signal level), baud rate: 9.6Kb/s, 19.2Kb/s, 38.4Kb/s, Stop bit: 1/2 selectable
|
| Power Requirements |
6 to 12V DC
|
| Power Consumption |
1.6 W (inactive motors) / 2.0 W (active motors)
|
| Operating Temperature |
0° to 50° C
|
| Storage Temperature |
-20° to 60° C
|
| Mass |
95 g
|
| Dimensions |
39.3 x 44.8 x 65mm
|
+49-(0)3641 2253-0
info@jencam.de