FCB-IX11AP

Artikel-Nr.: 10027018
  • abgekündigt 
  • 1/4" type EXview HAD CCD
  • Minimum Sensitivity of 1.5 lux
  • 40x zoom ratio (10x optical, 4x digital)
  • High quality image in both digital zoom and slow shutter modes
  • Various AE modes including a newly added Zoom trigger and interval mode
  • Expanded mode parameter for shutter speed and gain level
  • Various customizable settings
  • Key switch control compatibility
  • Field Memory/Freeze Mode
  • Lower power consumption (minimum 1.5 W)
  • EEPROM backup system without battery
  • Lead-free solder mounting board
  • High-speed serial communication (max. 38.4 kbps) and TTL signal-level control (VISCA™ protocol) for quick command processing
  • Programmable factory preset

Technische Details

JenCam Nr. 10027018
Bildsensor 1/4 type Exview HAD CCD
Signal System PAL
Effektive Pixelanzahl Approximately 440,000 pixels
Objektiv 10x Zoom f=4.2mm (wide) to 42 mm (tele) (F1.8 to F2.9)
Blickwinkel Horizontal 46° (Wide end) / 5.0° (Tele end)
Digital zoom 4x (40x with optical zoom)
Minimaler Arbeisabstand 10 mm (Wide end), 1000 mm (Tele end)
Zoom Geschwindigkeit Optical WIDE to Optical TELE 1.8 sec
Focus Geschwindigkeit Far to Near 0.5 sec
Sync system Internal
Horizontale Auflösung 460TV Line
Minimale Beleuchtung 1.5 lux (50 IRE)
Signalrauschabstand More than 50 dB
Verschlußzeit 1/1 sec. to 1/10,000 sec. 16 steps
Weißabgleich Auto, ATW, Indoor, Outdoor, One Push WB, Manual WB
Verstärkung Auto/Manual (-3 to 28 dB, 2 dB steps)
Belichtungsautomatik Auto, Manual, Priority mode, Bright, EV compensation, Back-light compensation
EV compensation -10.5 to +10.5 dB (1.5 dB steps)
Back-light Compensation ON/OFF
Titel Generator Mode: ON/OFF
Focussystem Auto (Sensitivity: Normal, Low), One-Push AF, Manual, Infinity Interval AF, Zoom Trigger AF
Bildeffekte Neg. Art, Black & White, Mirror Image, Picture freeze
Schaltmöglichkeiten Zoom tele, Zoom wide
Video Ausgang Analog VBS: 1.0 Vp-p (sync negative), Y/C Output
Kamerasteuerung VISCA (TTL/RS232C signal level), baud rate: 9.6Kb/s, 19.2Kb/s, 38.4Kb/s, Stop bit: 1/2 selectable
Spannungsversorgung 6 to 12V DC
Stromverbrauch 1.6 W (inactive motors) / 2.0 W (active motors)
Betriebstemperatur 0° to 50° C
Lagerungstemperatur -20° to 60° C
Gewicht 95 g
Abmessungen 39.3 x 44.8 x 65mm

Literatur / Begleitmaterial