XC-ST70

Product no.: 10015002
  • discontinued
  • High Sensitivity using the 2/3" CCD with HAD technology.
  • All controls outside the camera
  • Simplified and more flexible trigger from previous models
  • Small, light weight, one piece camera
  • Excellent vibration and shock characteristics
  • Small and light weight power adaptor

Technical Details

JenCam Nr. 10015002
Image Sensor 2/3-type IT CCD
Image Sensor Typ ICX422ALL
Effective Pixels 768(H) x 494(V)
Cell Size 11,6µm x 13,5µm
Signal System Internal / External (switched automatically)
External Sync Signal HD/VD
Scanning System 525 lines 60 fields/s 2:1 Interlaced
CCD horizontal drive frequency 14.187 MHz
CCD vertical drive frequency 15.734 kHz
H Jitter Less than 50 ns
Horizontal Resolution 570 TV lines
S/N ratio 60 dB
Minimum illumination 0.3 lux (F1.4, AGC ON eithout IR cut filter)
Sensitivity 400 lx at F8 (0 dB)
Gamma ON / OFF
Gain AGC (0-18 dB) Manual (0-18 dB) Fixed (0 dB) Selectable
Restart Reset Yes
Trigger Shutter Speed 1/4 to 1/8,000s
Normal Shutter 1/100 to 1/10,000s switchable at rear panel
Video Output 1.0 Vp-p Negative 75 Ω Unbalanced
Output Connector 12 pin (EIAJ)
Lens Mount C-Mount
Flange Back 17.526 mm
Storage Temperature -30° to 60 °C
Operating Temperature -5° to 45° C
Power Requirements DC +12 V (+10.5 to +15.0 V)
Power Consumption 2.1 W
Shock Resistance 70 G
Vibration Resistance 10 G (20 Hz to 200 Hz)
MTBF 70.600 h / 8,06 Jahre
Mass Approximately 110 g
Dimensions (W x H x D) 44 x 29 x 57,5 mm

Accessories

Product Note Price
DC-700CE DC-700CE
NT12/8 NT12/8
SK-2-8S-05 SK-2-8S-05
(Dimension length: 5000mm)
Kabel BNC-5M Kabel BNC-5M
(Dimension length: 5000mm)
VCT-ST70I VCT-ST70I
FL-CC5028-2M / C5028-M(KP) FL-CC5028-2M / C5028-M(KP)
FL-CC3516-2M / C3516-M(KP) FL-CC3516-2M / C3516-M(KP)
FL-CC2514-2M / C2514-M(KP) FL-CC2514-2M / C2514-M(KP)
FL-CC1614-2M / C1614-M(KP) FL-CC1614-2M / C1614-M(KP)
FL-HC1214-2M / H1212-M(KP) FL-HC1214-2M / H1212-M(KP)
Display accessory details

Datasheets